Used buying checklist
MG Tf reliability, common problems and used buying checks
A used MG Tf looks worse than average for reliability in UK MOT data: 21.6% of 12,139 tests failed, compared with 18.7% across all indexed models. A good example should have a clean MOT history for corrosion and structure, suspension and steering, and emissions, engine, and exhaust.
It can be, if the exact car has a clean history for corrosion and structure, suspension and steering, and emissions, engine, and exhaust.
Start with corrosion and structure, suspension and steering, and emissions, engine, and exhaust, then compare the car's mileage and recall record below.
Sources used: DVSA MOT tests (Apr 2026); vehicle recalls (Apr 2026); MOT fault wording (May 2025). MOT data does not capture every reliability issue, especially intermittent engine, gearbox or infotainment faults that do not appear during the test.
- 21.6% MOT failure rate
- Median tested mileage 57,580 miles
- 2,626 failed MOT tests analysed
Corrosion and structure is the clearest area to check
Corrosion and structure is the clearest named problem area in this model's MOT history (59.3 MOT notes per 100 tests). Example MOT phrases from this area include prescribed area excessively corroded significantly reducing structural strength, corroded to the extent that the rigidity of the assembly is significantly reduced, and corroded and seriously weakened.
Example MOT phrases to search in the car's history:
- prescribed area excessively corroded significantly reducing structural strength
- corroded to the extent that the rigidity of the assembly is significantly reduced
- corroded and seriously weakened
- excessively corroded
- ball joint excessively worn
- ball joint has excessive play
- Play in steering rack inner joint(s)
- ball joint dust cover severely deteriorated
- Lambda reading after 2nd fast idle outside specified limits
- leaking excessively from engine
Focus on corrosion and structure, suspension and steering, and emissions, engine, and exhaust
The model's recorded failure rate is 21.6%, +2.9 percentage points compared with the average across all models. Use the seller questions below to check whether repeat MOT notes have actually been repaired.
- MOT tests analysed12,139 tests
- Median tested mileage57,580 miles
- Failed MOT tests2,626
Should you buy a used MG Tf?
78.4% of the MOT tests we analysed for this model passed. The model's recorded failure rate is 21.6%, +2.9 percentage points compared with the average across all models. This is a buying brief for the exact car in front of you: clean repeat history matters more than badge reputation.
- Repeat unresolved MOT notes for corrosion and structure, suspension and steering, and emissions, engine, and exhaust
- corrosion and structure appearing across more than one MOT
- Any dangerous MOT failure on the exact car, especially if the same area appears again later
- A seller who cannot explain MOT wording such as "prescribed area excessively corroded significantly reducing structural strength"
It can be, if the exact car has a clean history for corrosion and structure, suspension and steering, and emissions, engine, and exhaust.
Start with corrosion and structure, suspension and steering, and emissions, engine, and exhaust, then compare the car's mileage and recall record below.
Corrosion and structure is the clearest named problem area in the MOT history (59.3 MOT notes per 100 tests). These counts are issue notes, not failure rates, because a single MOT can list several faults.
Past 100k miles on the MG Tf, MOT records most often point to corrosion and structure, suspension and steering, and emissions, engine, and exhaust.
The MOT failure rate rises from 25.0% at 6-10 years to 21.9% at 15+ years. Compare the car with the nearest age range before treating a fault as normal wear or a warning sign. The average MOT failure rate across all models in the same dataset is 18.7%.
Start with corrosion and structure, suspension and steering, emissions, engine, and exhaust, and lights and electrical. The checklist on this page explains why each area is being recommended, what to inspect, and what to ask the seller.
No relevant recall notices are listed in this report, but recall completion is tied to the exact vehicle, so the seller should still be able to prove recall status.
What should I check first?
Start with corrosion and structure, suspension and steering, emissions, engine, and exhaust, and lights and electrical. The checklist on this page explains why each area is being recommended, what to inspect, and what to ask the seller. Each item shows whether it comes from MOT results, recall notices, or a standard used-car check.
-
Corrosion and structure Seen in MOT results
Corrosion and structure is one of the most common MOT problem areas for this model (59.3 MOT notes per 100 tests).
What to check: Inspect sills, subframes, mounting points, arches, and underside corrosion advisories.
-
Suspension and steering Seen in MOT results
Suspension and steering is one of the most common MOT problem areas for this model (30.0 MOT notes per 100 tests).
What to check: Listen for knocks, check uneven tyre wear, and inspect steering play.
-
Emissions, engine, and exhaust Seen in MOT results
Emissions, engine, and exhaust is one of the most common MOT problem areas for this model (13.5 MOT notes per 100 tests).
What to check: Check warning lights, smoke, exhaust leaks, recent emissions failures, and service history.
-
Lights and electrical Seen in MOT results
Lights and electrical is one of the most common MOT problem areas for this model (9.1 MOT notes per 100 tests).
What to check: Check every lamp, warning light, horn, battery condition, and dashboard messages.
-
Windscreen, wipers, and mirrors Seen in MOT results
Windscreen, wipers, and mirrors is one of the most common MOT problem areas for this model (7.1 MOT notes per 100 tests).
What to check: Check windscreen damage, wiper operation, washers, mirrors, and demisting.
-
Tyres and wheels Seen in MOT results
Tyres and wheels is one of the most common MOT problem areas for this model (1.0 MOT notes per 100 tests).
What to check: Check tyre age, tread depth, sidewall damage, wheel condition, and alignment wear.
What changes with mileage?
Past 100k miles on the MG Tf, MOT records most often point to corrosion and structure, suspension and steering, and emissions, engine, and exhaust.
Common MOT problem areas
Common faults: what usually fails on this model?
Corrosion and structure is the clearest named problem area in the MOT history (59.3 MOT notes per 100 tests). These counts are issue notes, not failure rates, because a single MOT can list several faults.
Mileage and age checks
Mileage changes: what starts showing up after high mileage?
Past 100k miles on the MG Tf, MOT records most often point to corrosion and structure, suspension and steering, and emissions, engine, and exhaust. On lower-mileage cars, the most common named areas are corrosion and structure, suspension and steering, and emissions, engine, and exhaust.
| Mileage range | Tests | Vehicles | Failure rate (vs all models) | Median mileage |
|---|---|---|---|---|
| 0-50k | 4,569 | 3,800 | 16.1%+5.3 percentage points vs all models | 36,574 miles |
| 50-100k | 6,881 | 5,289 | 24.9%+4.2 percentage points vs all models | 68,121 miles |
| 100-150k | 590 | 435 | 29.8%+3.6 percentage points vs all models | 110,454 miles |
| 150-200k | 13 | 11 | 15.4%-11.9 percentage points vs all models | 164,320 miles |
Problem areas by mileage
Past 100k miles on the MG Tf, MOT records most often point to corrosion and structure, suspension and steering, and emissions, engine, and exhaust.
| Mileage range | Car areas most often recorded | Specific MOT defect examples |
|---|---|---|
| 0-50k |
|
|
| 50-100k |
|
|
| 100-150k |
|
|
| 150-200k |
|
|
Fair comparisons: is this problem normal for its age?
The MOT failure rate rises from 25.0% at 6-10 years to 21.9% at 15+ years. Compare the car with the nearest age range before treating a fault as normal wear or a warning sign. The average MOT failure rate across all models in the same dataset is 18.7%. The highest failure rate by age is 25.0% for 6-10 years cars, based on 4 tests.
| Age range | Tests | Vehicles | Failure rate (vs all models) | Median age |
|---|---|---|---|---|
| 6-10 years 2016–2020 reg. |
4 | 3 | 25.0%+8.4 percentage points vs all models | 9.5 years |
| 10-15 years 2011–2016 reg. |
787 | 633 | 18.4%-5.1 percentage points vs all models | 13.7 years |
| 15+ years pre-2011 reg. |
11,348 | 8,932 | 21.9%-4.0 percentage points vs all models | 19.5 years |
Recall records and data freshness
Recall context: are there safety notices to know about?
No relevant recall notices are listed in this report, but recall completion is tied to the exact vehicle, so the seller should still be able to prove recall status.
| No relevant recall notices are listed here. Recall completion is still vehicle-specific, so check the exact car with the manufacturer or DVSA. |
Related searches
Common ways people look up the MG Tf. Each link runs the search and lands on the relevant section of this report.
Related reliability guides
See where this model sits against other MG reports by MOT failure rate and common problem area.
Compare high-confidence model reports across all makes.
Use the fleet mileage baseline before checking this model's own mileage table.
Compare this model's age pattern with the wider MOT baseline.
Sources used: DVSA MOT tests (Apr 2026); vehicle recalls (Apr 2026); MOT fault wording (May 2025). These are patterns from many MOT tests and recall notices. They help you decide what to inspect and what to ask; they do not certify the condition of one specific car.